Toxic and hazardous substances control: New chemicals Receipt and status information,
[Federal Register: June 9, 2006 (Volume 71, Number 111)]
[Notices]
[Page 33449-33454]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr09jn06-35]
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2006-0488; FRL-8071-8]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a
[[Page 33450]]
new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from May 1, 2006, to May 19, 2006, consists of the PMNs, pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number, must be received on or before July 10, 2006.
ADDRESSES: Submit your comments, identified by docket identification (ID) no. EPA-HQ-OPPT-2006-0488, by one of the following methods.
http://www.regulations.gov. Follow the on-line
instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO, EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID number EPA-HQ-OPPT-2006-0488. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the Docket's normal hours of operation, and special arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-2006-0488. EPA's policy is that all comments received will be included in the public docket without change and may be made available online at http://www.regulations.gov, including any personal
information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an ``anonymous access'' systems, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov your e-mail address will be automatically captured and included as part of the comment that is placed in the public docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the regulations.gov index. Although listed in the index, some information is not publicly available, i.e., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the Internet and will be publicly available only in hard copy form. Publicly available docket materials are available electronically through regulations.gov or in hard copy at the OPPT Docket, EPA Docket Center (EPA/DC), EPA West, Room B102, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
-
General Information
-
Does this Action Apply to Me?
This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.
-
What Should I Consider as I Prepare My Comments for EPA?
-
Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is claimed CBI). In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
-
Tips for preparing your comments. When submitting comments, remember to:
i. Identify the document by docket number and other identifying information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information and/or data that you used.
v. If you estimate potential costs or burdens, explain how you arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.
viii. Make sure to submit your comments by the comment period deadline identified.
-
-
-
Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or
[[Page 33451]]
an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from May 1, 2006, to May 19, 2006, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
-
Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non- CBI information that may be available.
In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.
-
71 Premanufacture Notices Received From: 05/01/06 to 05/19/06
Projected Notice End Case No.
Received Date
Date
Manufacturer/Importer
Use
Chemical
P-06-0465
05/01/06
07/29/06
Meadwestvaco
(S) Asphalt
(G) Tall-oil fatty, Corporation
emulsifier salt
alkylamino amides, hydrochloride P-06-0466
05/01/06
07/29/06
CBI
(G) Construction (G) 2-propenoic acid, materials additive 2-methyl-, methyl ester, polymer P-06-0467
05/01/06
07/29/06
CBI
(G) Blocked
(G) Open, non- isocyanate
dispersive use. P-06-0468
05/02/06
07/30/06
CBI
(S) hardener for (G) Oxirane, architectural
(chloromethyl)-, coatings harener for polymer with .alpha.- metal primers for hydro-.omega.- maintenance coatings hydroxypoly[oxy(meth yl-1,2-ethanediyl)] and methyloxirane polymer with oxirane 2-aminopropyl methyl ether P-06-0469
05/02/06
07/30/06
CBI
(S) Chlorinated
(G) Chlorinated polyester resin used polyester resin in ultra violet curable inks and coatings P-06-0470
05/02/06
07/30/06
Cognis Corporation (S) Performance
(S) 1-propanaminium, additive for hard N,N,N-trimethyl-3- surface cleaners [(2-methyl-1-oxo- 2propenyl)-, chloride, polymer with N-(1- methylethyl)-2- propenamide, 2- methyl-2-[(1-oxo-2- propenyl) amino]-1- propanesulfonic acid, and 2- propenoic acid, Sodium salt P-06-0471
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0472
05/02/06
07/30/06
CBI
(G) Nonwoven internal (G) Fluoroalkyl additive
methacrylate copolymer P-06-0473
05/02/06
07/30/06
CBI
(G) Tile surface (G) Fluoroalkyl treatment
methacrylate copolymer P-06-0474
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0475
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0476
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0477
05/02/06
07/30/06
CBI
(G) Carpet treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0478
05/02/06
07/30/06
CBI
(G) Carpet treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0479
05/02/06
07/30/06
CBI
(G) Carpet treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0480
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0481
05/02/06
07/30/06
CBI
(G) Paper treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0482
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0483
05/02/06
07/30/06
CBI
(G) Paper treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0484
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0485
05/02/06
07/30/06
CBI
(G) texile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0486
05/02/06
07/30/06
CBI
(G) Paper treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0487
05/02/06
07/30/06
CBI
(G) monomer for
(G) Fluoroalkyl textile and paper acrylate treatment additive P-06-0488
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0489
05/02/06
07/30/06
CBI
(G) textile treatment (G) Fluoroalkyl additive
methacrylate copolymer
[[Page 33452]]
P-06-0490
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0491
05/02/06
07/30/06
CBI
(G) textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0492
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0493
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0494
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0495
05/02/06
07/30/06
CBI
(G) Carpet treatment (G) Fluorochemical additive
urethane P-06-0496
05/02/06
07/30/06
CBI
(G) Carpet treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0497
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0498
05/02/06
07/30/06
CBI
(G) Carpet treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0499
05/02/06
07/30/06
CBI
(G) Nonwoven internal (G) Fluoroalkyl additive
acrylate copolymer P-06-0500
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0501
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0502
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0503
05/02/06
07/30/06
CBI
(G) Textile treatment (G) additive
Fluoroalkylacrylate copolymer P-06-0504
05/02/06
07/30/06
CBI
(G) Carpet treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0505
05/02/06
07/30/06
CBI
(G) Textile treatment (G) Fluoroalkyl additive
methacrylate copolymer P-06-0506
05/02/06
07/30/06
CBI
(G) Nonwoven internal (G) Fluoroalkyl additive
methacrylate copolymer P-06-0507
05/02/06
07/30/06
CBI
(G) Paper treatment (G) Fluoroalkyl additive
acrylate copolymer P-06-0508
05/02/06
07/30/06
CBI
(G) Textile treatment (G) additive
Fluoroalkylacrylate copolymer P-06-0509
05/03/06
07/31/06
CBI
(G) Solvent in fuel (G) Substituted production; solvent alkanol in industrial plants P-06-0510
05/04/06
08/01/06
CBI
(G) Additive, open, (G) Polyether non-dispersive use modified polydimethylsiloxane P-06-0511
05/04/06
08/01/06
CBI
(G) Additive, open, (G) Polyether non-dispersive use modified polydimethylsiloxane P-06-0512
05/04/06
08/01/06
CBI
(G) Component in (G) Polyurethane polyurethane
prepolymer with a adhesive/sealant. polycarbonatediol P-06-0513
05/04/06
08/01/06
CBI
(G) Metal refining (S) Tantalum, fluoro intermediate
hydrogen complexes P-06-0514
05/05/06
08/02/06
CBI
(G) Chemical
(G) Al, mixed metal intermediate
and alcohol complex P-06-0515
05/08/06
08/05/06
CBI
(G) Paper strength (G) Glyoxalated additive
acrylamide, dadmac, 2- hydroxyethylacrylate ternary copolymer P-06-0516
05/08/06
08/05/06
CBI
(G) Paper strength (G) Glyoxalated additive
branched acrylamide, dadmac, 2- hydroxyethylacrylate ternary copolymer P-06-0517
05/08/06
08/05/06
CBI
(G) Catalyst
(S) Neodymium, tris[bis(2- ethylhexyl)phosphato- .kappa.o'',- .kappa.o''']]- P-06-0518
05/08/06
08/05/06
IGM Resins Inc.
(G) Ultra violet (S) Idodium, bis(4- initiator
methylphenyl)-, hexafluorophosphate( 1-) P-06-0519
05/09/06
08/06/06
CBI
(G) Pigment additive; (G) .beta.- open, non-dispersive alanine[(substituted- use
pyrrole- diyl)bis[(substitute d)bis, aluminium salt (3:2) P-06-0520
05/09/06
08/06/06
CBI
(G) Pigment additive; (G) [biphenyl]- open, non-dispersive sulfonamide],- use
((substituted)pyrrol e- diyl)bis[(substitute d)propyl- P-06-0521
05/08/06
08/05/06
CBI
(G) Paper strength (G) Acrylamide, additive
dadmac, 2- hydroxyethylacrylate ternary copolymer P-06-0522
05/08/06
08/05/06
CBI
(G) Paper strength (G) Branched additive
acrylamide, dadmac, 2- hydroxyethylacrylate ternary copolymer
[[Page 33453]]
P-06-0523
05/09/06
08/06/06
CBI
(G) Prepolymer of (G) Aromatic polyester urethane saturated copolyester P-06-0524
05/15/06
08/12/06
Huntsman Corporation (S) Intermediate for (S) Propanesulfonic liquid soap
acid, 1(or 2)- component;
hydroxy-, monosodium intermediate for salt surfactant P-06-0525
05/15/06
08/12/06
Huntsman Corporation (S) Liquid soap
(S) Octadecanoic acid, methyl-2- sulfoethyl ester, sodium salt P-06-0526
05/15/06
08/12/06
Huntsman Corporation (S) Liquid soap
(S) 9-octadecanoic acid, (9z)-, methyl- 2-sulfoethyl ester, sodium salt P-06-0527
05/15/06
08/12/06
Huntsman Corporation (S) Liquid soap
(S) Fatty acids, C8 18 and C18- unsaturated, methyl- 2-sulfoethyl esters, sodium salt P-06-0528
05/15/06
08/12/06
Huntsman Corporation (S) Liquid soap
(S) Fatty acids, coco, hydrogenated, methyl-2-sulfoethyl ester, sodium salt P-06-0529
05/15/06
08/12/06
Huntsman Corporation (S) Liquid soap
(S) Fatty acids, coco, heavy fractions, methyl-2- sulfoethyl esters, sodium salts P-06-0530
05/11/06
08/08/06
Septon Company of (S) Adhesives;
(S) 2,5-furandione, America
lubricant; emulsion polymer with 2- methyl-1-propene, amide imide P-06-0531
05/15/06
08/12/06
Oleon Americas, Inc. (G) Lubricant base (S) Fatty acids, oil
coco, esters P-06-0532
05/17/06
08/14/06
CBI
(G) Coating component (G) Substituted styrene acrylate copolymer P-06-0533
05/17/06
08/14/06
CBI
(G) Binder resin (G) ``Carbomonocycledica rboxylic acid, polymer with alkenedioic acid, 1,3-dihydro-1,3- dioxo-5- isobenzofurancarboxy lic acid, dihydro-3- (tetrapropenyl)-2,5- furandione, .alpha.,.alpha.'-[(1- methylethylidene)dic arbomonocycle]bis[.o mega.- hydroxypoly(oxy-1,2- ethanediyl)] and .alpha., .alpha.'- [(1- methylethylidene)dic arbomonocycle]bis[.o mega.- hydroxypoly[oxy(meth yl-1,2- ethanediyl)]]'' P-06-0534
05/17/06
08/14/06
CBI
(S) Base resin for (G) Oxirane based ultraviolet light polymer with 5- and electron beam isocyanato-1- curable formulations (isocyanatomethyl)- 1,3,3- trimethylycylohexane , 2-hydroxyethyl acrylate-blocked P-06-0535
05/19/06
08/16/06
BASF Corporation (G) Automotive
(G) Ester urethane application
In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:
-
26 Notices of Commencement From: 05/01/06 to 05/19/06
Commencement Notice Case No.
Received Date
End Date
Chemical
P-02-0256
05/01/06
04/25/06
(G) Polyester polyether isocyanate P-03-0591
05/01/06
03/23/06
(G) Water dispersable polyurethane polymer P-04-0289
05/17/06
04/21/06
(G) Ethylene - tetrafluoroethylene copolymer P-04-0291
05/16/06
05/03/06
(G) Isocyanate functional polyester urethane polymer P-04-0422
05/02/06
04/21/06
(G) Tetraalkyl indone P-04-0536
05/16/06
04/20/06
(G) Polyurethane P-04-0636
05/04/06
04/22/06
(G) Cuprate, [[[[[[[(sulfonaphthalenyl )]azo]- (substitutedphenyl)]azo]- (substitutedsulfonaphthal enyl)]azo]- substitutedphenyl- substituted heteromonocycle], sodium salts P-04-0721
05/12/06
05/08/06
(G) Polysiloxane, aminoalkyl terminated polymers with urea functionality alkylcyclohexane P-04-0844
05/15/06
04/20/06
(G) Polyalkylene phthalocyanine P-04-0888
05/10/06
04/12/06
(G) Dynacoll 7130 P-04-0950
05/09/06
05/01/06
(G) Reaction product of substituted naphthalenesulfonic acid azo substituted phenyl amino substituted triazine compound and substituted phenyl azo substituted naphthalenesulfonic acid
[[Page 33454]]
P-05-0439
05/05/06
03/10/06
(G) Acetate polymer with unsaturated alkane and alkenol, cyclic acetal with aldehyde P-05-0508
05/08/06
04/10/06
(S) Neodecanoic acid, oxiranylmethyl ester, polymer with 1,4- cyclohexanedimethanol, 5- isocyanato-1- (isocyanatomethyl)-1,3,3- trimethylcyclohexane and methyloxirane polymer with oxirane 2- aminopropyl methyl ether P-05-0585
05/08/06
04/10/06
(S) 2-propenoic acid, 2- methyl-, polymer with butyl 2-methyl-2- propenoate, 1,1- dimethylethyl 2-methyl-2- propenoate and 2- hydroxyethyl 2-methyl-2- propenoate, tert-bu peroxide-initiated P-05-0673
05/11/06
05/03/06
(G) Siloxane coated silica nanoparticles P-06-0029
05/02/06
04/19/06
(G) Amine modified monomer acrylate P-06-0105
05/17/06
04/25/06
(S) Coke(coal tar), low- temp., low-temp. gasification pitch, calcined P-06-0120
05/09/06
04/18/06
(G) Naphthalenedisulfonic acid salt P-06-0156
04/28/06
04/14/06
(S) Silane, ethenyltrimethoxy-, reaction products with 1- butene-ethylene-propene polymer P-06-0228
05/15/06
04/11/06
(G) Alkylcarbosilane polymer P-06-0235
05/15/06
04/11/06
(G) Product 1: alkoxylated chloro-substituted alkylchlorosilane, chloro- substituted alkyl alkoxysilane P-06-0236
05/15/06
04/11/06
(G) Product 2: alkoxylated chloro-substituted alkylchlorosilane, chloro- substituted alkyl alkoxysilane P-06-0251
05/17/06
05/04/06
(G) Sodium salt of the copolymer of acrylic acid. methyl methacrylate, p- sulfophenymethallylether, sodium salt, sodium methallylsulfonate, 2- acrylamido-2- methylpropane sulfonic acid sodium salt P-06-0270
05/16/06
05/10/06
(S) Fatty acids, C16 18, isononyl esters P-93-1700
05/15/06
05/05/06
(G) Polyester polyol isocyanate polymer P-99-0858
05/09/06
05/01/06
(G) Polyester polyether isocyanate polymer
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: May 31, 2006. LaRona M. Washington, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.
[FR Doc. E6-8931 Filed 6-8-06; 8:45 am]
BILLING CODE 6560-50-S