Toxic and hazardous substances control: New chemicals Receipt and status information,
[Federal Register: April 8, 2005 (Volume 70, Number 67)]
[Notices]
[Page 18013-18021]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr08ap05-59]
[[Page 18013]]
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2005-0020; FRL-7708-8]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from February 21, 2005 to March 15, 2005, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
DATES: Comments identified by the docket ID number OPPT-2004-0020 and the specific PMN number or TME number, must be received on or before May 9, 2005.
ADDRESSES: Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
-
General Information
-
Does this Action Apply to Me?
This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.
-
How Can I Get Copies of this Document and Other Related Information?
-
Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2004-0020. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566- 0280.
-
Electronic access. You may access this Federal Register document electronically through the EPA Internet under the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select ``search,'' then key in the appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.
-
-
How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked ``late.'' EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please
[[Page 18014]]
follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.
-
Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/ , and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number OPPT-2004-0020. The system is an ``anonymous access'' system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2004-0020 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an ``anonymous access'' system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e- mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.
-
By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460- 0001.
-
By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-20040020 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930.
-
-
How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.
-
What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your comments:
-
Explain your views as clearly as possible.
-
Describe any assumptions that you used.
-
Provide copies of any technical information and/or data you used that support your views.
-
If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.
-
Provide specific examples to illustrate your concerns.
-
Offer alternative ways to improve the notice or collection activity.
-
Make sure to submit your comments by the deadline in this document.
-
To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.
-
-
-
Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from February 21, 2005 to March 15, 2005, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
-
Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.
[[Page 18015]]
-
96 Premanufacture Notices Received From: 02/21/05 to 03/15/05
Projected Notice End Case No.
Received Date
Date
Manufacturer/Importer
Use
Chemical
P-05-0335
02/22/05
05/22/05
International
(S) Component in (S) 2-propenoic acid, Specialty Products membranes to enhance 2-metyhl-, dodecyl hydrophilicity/
ester, polymer with hydration flux;
1-ethenyl-2- component in
pyrrolidinone and 2- coatings to enhance propenoic acid adhesion of coating to the substrate; component in adhesives to enhance adhesive coatings on synthetic substrates; component in cleaners used as a thickener P-05-0336
02/22/05
05/22/05
CBI
(S) Use as a
(G) Isoxadifen-ethyl herbicide safener in formulated pesticide products P-05-0337
02/22/05
05/22/05
CBI
(G) Polymer is
(G) applied as a
Diphenylcaprylmethic functional coating one over inorganic solids. P-05-0338
02/23/05
05/23/05
Tremco Inc.
(G) Water-proofing (G) Alkylene ether sealant additive amine, blocked P-05-0339
02/23/05
05/23/05
Falcon Lab LLP
(S) Adjuvant for (S) Nonanoic acid, pesticides
ammonium salt P-05-0340
02/24/05
05/24/05
Eftec North America, (G) Automobile
(G) Blocked L.L.C.
coating
polyurethane P-05-0341
02/24/05
05/24/05
Eftec North America, (G) Automobile
(G) Blocked L.L.C.
coating
polyurethane P-05-0342
02/24/05
05/24/05
CBI
(G) Coating and ink (G) Glycerides, alkyl ingredient
mono, di- and tri-, alkoxylated P-05-0343
02/24/05
05/24/05
CBI
(G) Surface coating (G) Siloxanes and resin
silicones, di- methyl, alkoxy aryl, polymers with aryl silsesquioxanes, alkoxy-terminated, polymers with epichlorohydrin and 4,4'-(1-alkylidene) bis [cycloalkanol] P-05-0344
02/25/05
05/25/05
E.I. Du Pont De
(G) Intermediate (G) Polyether glycol Nemours and Company Inc. P-05-0345
02/25/05
05/25/05
E.I. Du Pont De
(G) Intermediate (G) Copolyether Nemours and Company
glycol Inc. P-05-0346
02/24/05
05/24/05
CBI
(G) An open non- (G) Polyester resin dispersive use P-05-0347
02/25/05
05/25/05
Ashland Inc.,
(G) The material (G) Environmental Health performs as a
Poly[oxy(alkyldiyl), and Safety
flexibilizer for .alpha.-hydro- epoxy vinyl ester .omega.-hydroxy-, resins
acrylated-blocked polymer with 1,1'- methylenebis[isocyan atobenzene], P-05-0348
02/24/05
05/24/05
CBI
(G) Fluid retention (G) polymer
Dialkyldiallylsodium halide with unsaturated phosphonic acid, acrylamido alkyl propane sulfonic acid sodium salt, and two substituted monomers. P-05-0349
02/24/05
05/24/05
CBI
(G) Fluid retention (G) polymer
Dialkyldiallylsodium halide with unsaturated phosphonic acid, acrylamido alkyl propane sulfonic acid sodium salt, and two substituted monomers. P-05-0350
02/25/05
05/25/05
CBI
(S) Toner binder (G) Polyester resin P-05-0355
02/28/05
05/28/05
Ashland Inc.,
(G) Two-component (G) Poly(oxy-1,2- Enviornmental Health laminating adhesive ethanediyl), .alpha.- and Safety
designed to exhibit hydro-.omega.- improved adhesion to hydroxy-, polymer metal surfaces and with alkyl improved resistance diisocyanate to heat exposure. P-05-0356
03/01/05
05/29/05
KAO Specialties
(S) Emulsifier in (S) Amides, canola- Americas LLC
metalworking fluids; oil, n- thickener and foam (hydroxyethyl), booster in
ethoxylated dishwashing agent and car shampoo P-05-0357
02/28/05
05/28/05
Eastman Kodak Company (G) Chemical
(S) Pentadecane, 7- intermediate,
(bromomethyl)- destructive use P-05-0358
02/28/05
05/28/05
3M
(G) Textile treatment (G) Polycarbodiimide additive. P-05-0359
03/02/05
05/30/05
CBI
(G) Crosslinker
(G) Isocyanate acid, polyalkylenepolyphen yylene ester, 2-(2- alkoxy)alkanol-and alkylene glycol- blocked P-05-0360
03/02/05
05/30/05
CBI
(G) Printing ink (G) 7h-pyrazolo [1,5- b] [1,2,4] triazole derivative P-05-0361
03/02/05
05/30/05
CBI
(G) Chemical additive (G) Siloxanes and silicones, di- methyl, 3-(2- hydroxyalkoxy)-1-[(2- hydroxyalkoxy)alkyl]- 1-alkenyl methyl P-05-0362
03/02/05
05/30/05
CMP Coatings, Inc. (S) Paint additive (G) Reaction products with dimethyl octatriene
[[Page 18016]]
P-05-0363
03/03/05
05/31/05
CBI
(G) Open non-
(G) Aliphatic, dispersive (coatings blocked additive)
polyisocyanate P-05-0364
03/03/05
05/31/05
IGM Resins Inc
(S) Cationic ultra (S) 9h- violet-initiator for thioxanthenium, 10- production of ultra [1,1'-biphenyl]-4-yl- violet-curable dvd- 2-(1-methylethyl)-9- adhesives; cationic oxo-, utlra violet-
hexafluorophosphate( initiator for
1-) production of ultra violet-curable can coatings; cationic ultra violet- initiator for production of ultra violet-curable flexographic ink P-05-0365
03/04/05
06/01/05
CBI
(G) Paint primer for (G) Substituted metal substrates; aliphatic amine corrosion inhibitor for metal substrates P-05-0366
03/04/05
06/01/05
Eastman Kodak Company (G) Chemical
(G) Substituted intermediate,
phenylsulfonyl, destructive use
substituted acid chloride P-05-0367
03/04/05
06/01/05
CBI
(G) Coating component (G) Mixed metal oxide complex P-05-0368
03/04/05
06/01/05
CBI
(G) Resin coating (G) Alkanoic acid, 2- hydroxy-, ion(1-), salt with bisphenol a-bisphenola- epichlorohydrin polymer alkanoate-2- (dialkylamino)alkano l-2-alkyl-1-alkanol- toluene diisocyanate reaction products P-05-0369
03/04/05
06/01/05
CBI
(G) Automotive
(G) Acrylic polymer coatings P-05-0370
03/04/05
06/01/05
CBI
(G) Automotive
(G) Acrylic polymer coatings P-05-0371
03/04/05
06/01/05
CBI
(G) Automotive
(G) Acrylic polymer coatings P-05-0372
03/04/05
06/01/05
CBI
(G) Automotive
(G) Acrylic polymer coatings P-05-0373
03/04/05
06/01/05
CBI
(G) Automotive
(G) Acrylic polymer coatings P-05-0374
03/04/05
06/01/05
CBI
(G) Automotive
(G) Acrylic polymer coatings P-05-0375
03/04/05
06/01/05
CBI
(G) Pigment
(G) Sma ester dispersant
potassium salt P-05-0376
03/04/05
06/01/05
CBI
(G) Pigment
(G) Sma ester sodium dispersant
salt P-05-0377
03/04/05
06/01/05
Henkel Consumer
(S) Adhesive and (G) Silane terminated Adhesives Inc.
sealant
polyurethane P-05-0378
03/07/05
06/04/05
Ashland Inc.,
(G) Acrylic component (G) B-keto ester, Enviornmental Health of industrial
polymer with 2-ethyl- and Safety
coatings and
2-[[(1-oxo-2- adhesive
propenyl)oxy]methyl]- applications
1,3-propanediyl di-2- propenoate and 2- hydroxyethyl 2- propenoate, polymer with krasol lbd 2000 P-05-0379
03/07/05
06/04/05
Forbo Adhesives, LLC (G) Hot melt adhesive (G) Isocyanate functional polyester urethane polymer P-05-0380
03/07/05
06/04/05
Ashland Inc.,
(G) Roofing adhesive (G) Benzene, 1,1'- Enviornmental Health for bonding roof methylenebis[4- and Safety
membranes (such as isocyanato-, polymer pvc, tpo) to
with substrates (such as benzenedicarboxylic insulation boards or acid, butyl dialkyl concrete surfaces) ester, poly[oxy(methyl-1,2- ethanediyl)], .alpha.-hydro-- hydroxy-, oxirane, alkyll-, polymer with oxirane, ether with propanepolyol and sartomer's hlbh p-3000 and lexorez 1180 P-05-0381
03/04/05
06/01/05
Ge Betz
(G) Component in a (G) Phosphonated non-chrome treatment polyamine for metals. P-05-0382
03/04/05
06/01/05
Ge Betz
(G) Component in a (G) Phosphonated non-chrome treatment polyamine for metals. P-05-0383
03/04/05
06/01/05
Ge Betz
(G) Component in a (G) Phosphonated non-chrome treatment polyamine for metals. P-05-0384
03/04/05
06/01/05
Ge Betz
(G) intermediate (G) Polyamine phosphate salt P-05-0385
03/04/05
06/01/05
Ge Betz
(G) intermediate (G) Polyamine hydrochloride salt P-05-0386
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.-ketoester, Enviornmental Health coating, ink
polymers with and Safety
bisphenol a diglycidyl ether homopolymer diacrylate 3-(C10 16- alkyloxy)-2- hydroxypropyl ethers and alkyl diacrylate, reaction products with monoalkyl acrylate P-05-0387
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.-ketoester, Enviornmental Health coating, ink
polymer with and Safety
(chloromethyl)oxiran e polymer with 4,4'- (1- methylethylidene)bis [phenol] 2- propenoate and alkyl diacrylate, reaction products with monoalkyl acrylate a and monoalkyl acrylate b
[[Page 18017]]
P-05-0388
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.-ketoester, Enviornmental Health coating, ink
polymer with cn 115, and Safety
2-propenoic acid, oxybis(methyl-2,1- ethanediyl) ester and cyclic alkyl monoacrylate P-05-0389
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.-ketoester, Enviornmental Health coating, ink
polymers with and Safety
bisphenol a diglycidyl ether homopolymer diacrylate 3-(C10 16- alkyloxy)-2- hydroxypropyl ethers and alkyl diacrylate, reaction products with monoalkyl acrylate P-05-0390
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.-ketoester, Enviornmental Health coating, ink
polymer with and Safety
(chloromethyl)oxiran e polymer with 4,4'- (1-methylethylidene) bis[phenol]2- propenoate and alkyl diacrylate, reaction products with monoalkyl acrylate a and monoalkyl acrylate b P-05-0391
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.-ketoester, Enviornmental Health coating, ink
polymers with cn and Safety
115, 2-propenoic acid, oxybis(methyl- 2,1-ethanediyl) ester and cyclic alkyl monoacrylate P-05-0392
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.- Enviornmental Health coating, ink, over- ketoesters, polymers and Safety
print varnish
with bisphenol a diglycidyl ether homopolymer diacrylate 3- (C10 16)-alkyloxy)-2- hydroxypropyl ethers, 1,6- hexanediol diacrylate, polyethylene glycol monoacrylate ether with trimethylolpropane (3:1), and amine acrylate, reaction products with alkyl amine and alkanol amine P-05-0393
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.- Enviornmental Health coating, ink, over- ketoesters, polymers and Safety
print varnish
with bisphenol a diglycidyl ether homopolymer diacrylate 3- (C10 16)-alkyloxy)-2- hydroxypropyl ethers, 1,6- hexanediol diacrylate, polyethylene glycol monoacrylate ether with trimethylolpropane (3:1), and alkyl acrylate, reaction products with alkyl amine and alkanol amine P-05-0394
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.- Enviornmental Health coating, ink, over- ketoesters, polymers and Safety
print varnish
with aromatic epoxy acrylate, 1,6- hexanediol diacrylate, polyethylene glycol monoacrylate ether with trimethylolpropane (3:1), and amine acrylate, reaction products with alkyl amine and alkanol amine P-05-0395
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.- Enviornmental Health coating, ink, over- ketoesters, polymers and Safety
print varnish
with aromatic epoxy acrylate, 1,6- hexanediol diacrylate, polyethylene glycol monoacrylate ether with trimethylolpropane (3:1), and alkyl acrylate, reaction products with alkyl amine and alkanol amine P-05-0396
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.-ketoester Enviornmental Health coating, ink, over- and .beta.-diketone, and Safety
print varnish
polymers with bisphenol a diglycidyl ether homopolymer diacrylate 3- (C10 16)-alkyloxy)-2- hydroxypropyl ethers, 1,6- hexanediol diacrylate, polyethylene glycol monoacrylate ether with trimethylolpropane (3:1), and amine acrylate, reaction products with alkyl amine and alkanol amine
[[Page 18018]]
P-05-0397
03/07/05
06/04/05
Ashland Inc.,
(G) Adhesive,
(G) .beta.-ketoester Enviornmental Health coating, ink, over- and .beta.-diketone, and Safety
print varnish
polymers with bisphenol a diglycidyl ether homopolymer diacrylate 3- (C10 16)-alkyloxy)-2- hydroxypropyl ethers, 1,6- hexanediol diacrylate, polyethylene glycol monoacrylate ether with trimethylolpropane (3:1), and alkyl acrylate, reaction products with alkyl amine and alkanol amine P-05-0398
03/08/05
06/05/05
Kemira Chemicals, (G) Dispersive use (G) Fatty acids, Inc.
(e.g., paper
C16 18 and C18- manufacturing)
unsaturated reaction products with triethanolamine, dimethyl sulfate- quaternized P-05-0399
03/08/05
06/05/05
Kemira Chemicals, (G) Dispersive use (G) Fatty acids, Inc.
(e.g., paper
C16 18 and C18- manufacturing)
unsataurated reaction products with triethanolamine, methyl chloride- quaternized P-05-0400
03/08/05
06/05/05
Firmenich Inc.
(S) Aroma chemical (S) 1-butanone, 3- for use in fragrance (dodecylthio)-1- mixtures, that in (2,6,6-trimethyl-3- turn are used in cyclohexen-1-yl)- perfumes, soaps, cleaners, etc. P-05-0401
03/09/05
06/06/05
Forbo Adhesives, LLC (G) Hot melt
(G) Isocyanate polyurethane
functional polyester adhesive
acrylic polyether urethane polymer P-05-0402
03/08/05
06/05/05
CBI
(G) Paper additive (G) Arene,alkenyl-, homopolymer, hydroxyaromatic carboxylic acid- terminated, metal complexes P-05-0403
03/08/05
06/05/05
CBI
(G) Paper additive (G) Alkylaldehyde, polymer with alkylarenol, hydroxyaromatic carboxylic acid- terminated, metal complexes P-05-0404
03/09/05
06/06/05
CBI
(G) Open non-
(G) Polymer modified dispersive use
rosin. P-05-0405
03/10/05
06/07/05
Eastman Kodak Company (G) Contained use in (G) Substituted an article
phenylsulfonyl, halosubstituted benzamide P-05-0406
03/10/05
06/07/05
Eastman Kodak Company (G) Chemical
(G) Substituted intermediate,
naphthalenedisulfoni destructive use
c acid P-05-0407
03/10/05
06/07/05
CBI
(G) Polyester resin (G) Poyester P-05-0408
03/10/05
06/07/05
CBI
(G) Polyester resin (G) Poyester P-05-0409
03/10/05
06/07/05
CBI
(G) Polyester resin (G) Poyester P-05-0410
03/10/05
06/07/05
CBI
(G) Polyester resin (G) Poyester P-05-0411
03/11/05
06/08/05
CBI
(G) Coating resin (G) Phenol, 4,4'-(1- alkylalkylidene)bis- , reaction products with bisphenol a- epichlorohydrin polymer alkanoate, dialkylenetriamine, 2- (alkylamino)alkanol, 1,1'-alkylenebis[4- isocyanatobenzene] and polyalkylene glycol ether with bisphenol a (2:1) P-05-0412
03/11/05
06/08/05
IGM Resins Inc
(S) Free radical - (S) Poly(oxy-1,4- initiator for
butanediyl), .alpha.- production of ultra [[(9-oxo-9h- violet-curable
thioxanthenyl)oxy]ac offset inks; free etyl]-.omega.-[[[(9- radical - initiator oxo-9h- for production of thioxanthenyl)oxy]ac ultra violet-curable etyl]oxy]- wood coatings; free radical -initiator for production of ultra violet curable flexographic ink P-05-0413
03/11/05
06/08/05
IGM Resins Inc
(S) Free radical - (S) Poly(oxy-1,4- initiator for
butanediyl),.alpha.- production of ultra [(4- violet-curable
benzoylphenoxy)acety offset inks; free l]-.omega.-[[(4- radical - initiator benzoylphenoxy)acety for production of l]oxy]- ultra violet-curable wood coatings; free radical -initiator for production of ultra violet curable flexographic ink P-05-0414
03/14/05
06/11/05
International
(S) Intermediate in (S) 1-dodecanaminium, Specialty Products the production of n,n-dimethyl-n-[3- styleze w-20 /
[(2-methyl-1-oxo-2- styleze w-10
propenyl)amino]propy l]-, chloride P-05-0415
03/11/05
06/08/05
CBI
(G) Automotive
(G) Acrylic polymer coatings P-05-0416
03/11/05
06/08/05
CBI
(G) Automotive
(G) Acrylic polymer coatings
[[Page 18019]]
P-05-0417
03/14/05
06/11/05
Cytec Industries Inc. (G) crosslinking (G) Tris-alkyl-alkoxy resin
melamine polymer P-05-0418
03/15/05
06/12/05
Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid, Additives
additive for
6,6'6''-(1,3,5- metalworking fluids triazin-2,4,6- triyltriimino) tris- , compound with 2- aminoethanol P-05-0419
03/15/05
06/12/05
Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid, Additives
additive for
6,6'6''-(1,3,5- metalworking fluids triazin-2,4,6- triyltriimino)tris-, compound with 2- amino-2-methyl-1- propanol P-05-0420
03/15/05
06/12/05
Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid, Additives
additive for
6,6'6''-(1,3,5- metalworking fluids triazin-2,4,6- triyltriimino)tris-, compound with 1- amino-2-propanol P-05-0421
03/15/05
06/12/05
Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid, Additives
additive for
6,6'6''-(1,3,5- metalworking fluids triazin-2,4,6- triyltriimino)tris-, compound with 1,1',1'' - nitrilotris [2- propanol] P-05-0422
03/15/05
06/12/05
Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid, Additives
additive for
6,6'6''-(1,3,5- metalworking fluids triazin-2,4,6- triyltriimino)tris-, compound with 1,1'- iminobis[2-propanol] P-05-0423
03/15/05
06/12/05
Lubrizol Metalworking (S) Anti-corrosion (S) Hexanoic acid, Additives
additive for
6,6',6''-(1,3,5- metalworking fluids triazine-2,4,6- triyltriimino)tris-, compound with 2-(2- aminoethoxy) ethanol P-05-0424
03/15/05
06/12/05
Eftec North America, (G) Automobile
(G) Nh2-terminated L.L.C.
coating
polyurethane prepolymer P-05-0425
03/15/05
06/12/05
Cytec Surface
(S) Binder for paints (G) 2-propenoic acid, Specialties Inc. and coatings
2-methyl-, 2- hydroxyalkyl ester, polymer with butyl 2- propenoate, ethenylbenzene, 4- hydroxybutyl 2- propenoate, 2- methylpropyl 2- methyl-2-propenoate, and 2-oxepanone and 2-propenoic acid, tert-bu 2- ethylhexaneperoxoate- initiated, compounds with 2- (dimethylamino)ethan ol P-05-0426
03/15/05
06/12/05
Cytec Surface
(S) Binder for paints (G) 2-propenoic acid, Specialties Inc. coatings
2-methyl-, alkyl ester, polymer with butyl 2-propenoate, ethenylbenzene, and 2-propenoic acid, tert-bu 2- ethylhexaneperoxoate- initiated, compounds with 2- (dimethylamino)ethan ol P-05-0427
03/15/05
06/12/05
CBI
(G) Chemical
(G) Polyketone intermediate
oligomer P-05-0428
03/15/05
06/12/05
Cytec Surface
(S) Binder for paints (G) 1,3- Specialties Inc. and coatings
benzenedicarboxylic acid, polymer with 1,3- diisocyanatomethylbe nzene, 2-ethyl-2- (hydroxymethyl)-1,3- propanediol, hexanedioic acid, 1,6-hexanediol, 3- hydroxy-2- (hydroxymethyl)-2- methylpropanoic acid, 5-isocyanato-1- (isocyanatomethy l)- 1,3,3- trimethylcyclohexane , and (alkylidene)bis[cycl ohexanol], 3- oxobutanoate, compound with n,n- diethylethanamine P-05-0429
03/15/05
06/12/05
Cytec Surface
(S) Resin for
(G) Modified fatty Specialties Inc. industrial paints acids, polymer with 1,6-hexanediol, isophthalic acid, and trimellitic anhydride P-05-0430
03/15/05
06/12/05
CBI
(G) Stabilizing
(G) Substituted additive for
benzotriazole polymers P-05-0431
03/15/05
06/12/05
CBI
(G) Lubricant
(G) 2,5-furandione, additive
polymer with ethane and 1-propene, reaction product with aryl amine
[[Page 18020]]
P-05-0432
03/15/05
06/12/05
DIC International (G) Adhesives
(G) Alkanedioic acid, (USA), Inc.
polymer with amine, alkanediols, caprolactone, dialkyl ester of sulfated aromatic dicarboxylic acid, sodium salt, hydroxy substituted alkane, isocyanates and alkanetriol. P-05-0437
03/15/05
06/12/05
Cytec Surface
(S) Binder for paints (G) 2-propenoic acid, Specialties Inc. and coatings
2-methyl-, 2- hydroxyethyl ester, polymer with butyl 2- propenoate, ethenylbenzene, 4- hydroxybutyl 2- propenoate 2- methylpropyl 2- methyl-2-propenoate, and 2-oxepanone, tert-bu 2- ethylhexaneperoxoate- initiated
In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:
-
1 Test Marketing Exemption Notices Received From: 02/21/05 to 03/16/05
Projected Notice End Case No.
Received Date
Date
Manufacturer/Importer
Use
Chemical
T-05-0003
03/14/05
04/27/05
CBI
(G) Polyurethane's (G) Soy polyol market
In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:
-
49 Notices of Commencement From: 02/21/05 to 03/15/05
Commencement Notice Case No.
Received Date
End Date
Chemical
P-00-0536
03/09/05
02/21/05
(G) Reaction product of: polyoxyalkylene solution with trimethylolpropane, 1,4, cyclohexane dimethanol, cyclic aliphatic anhydrides, trimellitic anhydride and block copolymers of ethylene oxide + propylene oxide P-00-0537
03/09/05
02/28/05
(G) Reaction product: polyoxyalkylene solution with trimethylolpropane, 1,4 cyclohexane dimethanol, cyclic aliphatic anhydrides and trimellitic anhydride P-03-0698
03/03/05
02/15/05
(G) Rosin, polymer with a monocarboxylic acid, alkylphenols, formaldehyde, maleic anhydride and pentaerythritol. P-03-0715
03/08/05
03/01/05
(G) Dialkyl dimethyl ammonium carbonate (1:1) P-03-0716
03/08/05
03/01/05
(G) Dialkyl dimethyl ammonium carbonate (2:1) P-03-0849
03/03/05
02/22/05
(G) Aqueous polyurethane dispersion P-03-0866
03/14/05
02/16/05
(S) Siloxanes and silicones, di-methyl, polymers with 3-[(2- aminoethyl)amino]propyl ph silsesquioxanes, methoxy-terminated P-04-0421
03/04/05
02/17/05
(G) Polyester polycarbamate P-04-0436
03/10/05
03/01/05
(G) Urethane acrylate P-04-0462
03/09/05
02/14/05
(G) Polyurethane prepolymer P-04-0475
03/09/05
02/02/05
(G) Alkyl methacrylate copolymer P-04-0495
02/23/05
09/27/04
(G) Direct black azo dye P-04-0498
02/23/05
09/27/04
(G) Direct black azo dye P-04-0573
03/03/05
02/12/05
(G) Aliphatic polyisocyanate P-04-0584
02/25/05
01/20/05
(G) Maleic anhydride and acrylics modified polyolefin P-04-0634
03/09/05
03/02/05
(G) Reaction product of: isophorone diisocyanate, aliphatic diamine, .beta.hydro-.omega.- hydroxypoly (oxy-1,4- butanediyl) and aliphatic hydroxy functional polyols. P-04-0675
03/01/05
02/10/05
(G) N,n,n-trialkyl- alkylaminium, n- aminocarbonylalkenyl, chloride, polymer with n- sulfoalkyl- aminocarbonylalkenyl, sodium salt and aminocarbonylalkenyl P-04-0676
03/01/05
02/10/05
(G) N,n,n-trialkyl- alkylaminium, n- aminocarbonylalkenyl, chloride, polymer with n- sulfoalkyl- aminocarbonylalkenyl, sodium salt and aminocarbonylalkenyl P-04-0692
02/28/05
02/10/05
(G) Trifunctional acrylic ester P-04-0693
03/15/05
02/10/05
(G) Urethane acrylate oligomer P-04-0715
02/24/05
02/08/05
(G) Acrylic copolymer P-04-0745
02/23/05
01/28/05
(G) Organosilane ester P-04-0746
02/23/05
01/28/05
(G) Amino phenolic reaction product with polyvinylphenol
[[Page 18021]]
P-04-0751
03/09/05
02/10/05
(G) Alkanedioic acid, polymer with 2-ethyl-2- (hydroxymethyl)-1,3- propanediol, 1,3- isobenzofurandione and 2- methyl-1,3-propanediol, 2- hydroxy-3-[(1- oxoneodecyl)oxy]propyl ester P-04-0763
03/01/05
02/10/05
(G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), calcium sodium salt P-04-0764
03/01/05
02/10/05
(G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), sodium salt P-04-0797
02/22/05
01/28/05
(G) Poly acrylic dispersion peroxide initiated poly acrylic esters with amine salt. P-04-0802
02/23/05
02/08/05
(G) Isocyanate terminated urethane polymer P-04-0817
03/04/05
02/23/05
(G) Trimethyl acyclic alkenones P-04-0818
03/10/05
02/23/05
(G) Urethane acrylate P-04-0832
02/23/05
02/11/05
(S) Bicyclo[2.2.1]heptan-2- ol, 2-ethyl-1,3,3- trimethyl- P-04-0839
02/25/05
02/08/05
(G) Copolymer of acrylic acid and maleic acid P-04-0840
02/25/05
02/11/05
(G) Copolymer of maleic acid and styrene P-04-0841
02/25/05
02/14/05
(G) Copolymer of maleic acid and styrene P-04-0842
02/25/05
02/08/05
(G) Copolymer of maleic acid and styrene P-04-0843
02/25/05
02/11/05
(G) Copolymer of acrylic acid and styrene P-04-0872
02/23/05
01/25/05
(G) Aromatic polyester polyurethane prepolymer based on mdi P-04-0877
03/15/05
03/04/05
(G) Substituted ppvs (poly- p-phenylen-vinylens) P-04-0879
02/23/05
01/24/05
(G) C11 17 hydrocarbons P-04-0911
02/24/05
01/24/05
(G) Aryl-substituted diether propane P-04-0960
03/11/05
02/14/05
(G) Biphenyl-bis(azo- acetoaceto-benzoate) P-05-0040
03/04/05
01/24/05
(G) Modified starch- acrylate polymer P-05-0066
02/23/05
02/16/05
(G) Polyester polyurethane P-05-0071
03/10/05
02/16/05
(G) Telechelic polyacrylates P-05-0077
02/23/05
02/18/05
(S) Siloxanes and silicones, di-methyl, 3- hydroxypropyl methyl, ethers with polyethylene glycol and polyethylene glycol mono(2- carboxyethyl) ether, polymers with 1,1'- methylenebis[4- isocyanatocyclohexane] P-05-0103
02/22/05
02/07/05
(G) Halo phenyl amino substituted cyclohexene salt P-05-0111
02/25/05
02/22/05
(G) Toluylenediisocyanate, reaction product with benzenedimethanamine and methoxypolyethylene glycol P-05-0113
02/25/05
02/22/05
(G) Polyethylene- polypropylene glycol, reaction product with octadecylisocyanate P-95-0482
03/15/05
02/23/05
(G) Condensation polyester of glycols and diacids
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: March 30, 2005.
Vicki A. Simons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.
[FR Doc. 05-6854 Filed 4-7-05; 8:45 am]
BILLING CODE 6560-50-S