Toxic and hazardous substances control: New chemicals Receipt and status information,
[Federal Register: February 24, 2003 (Volume 68, Number 36)]
[Notices]
[Page 8602-8607]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr24fe03-40]
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2003-0007; FRL-7295-1]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 11, 2003 to January 28, 2003, consists of the PMNs, pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
DATES: Comments identified by the docket ID number OPPT-2003-0007 and the specific PMN number or TME number, must be received on or before March 26, 2003.
ADDRESSES: Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Acting Director, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
-
General Information
-
Does this Action Apply to Me?
This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.
-
How Can I Get Copies of This Document and Other Related Information?
-
Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2003-0007. The official public
[[Page 8603]]
docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566-0280.
-
Electronic access. You may access this Federal Register document electronically through the EPA Internet under the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select ``search,'' then key in the appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.
-
-
How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked ``late.'' EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.
-
Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/ edocket , and follow the online instructions for submitting comments.
Once in the system, select`` search,'' and then key in docket ID number OPPT-2003-0007. The system is an ``anonymous access'' system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov,
Attention: Docket ID Number OPPT-2003-0007 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an ``anonymous access'' system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e- mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.
-
By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460- 0001.
-
By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Building Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2003-0007
[[Page 8604]]
and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930.
-
-
How Should I Submit CBI To the Agency?
Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.
-
What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your comments:
-
Explain your views as clearly as possible.
-
Describe any assumptions that you used.
-
Provide copies of any technical information and/or data you used that support your views.
-
If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.
-
Provide specific examples to illustrate your concerns.
-
Offer alternative ways to improve the notice or collection activity.
-
Make sure to submit your comments by the deadline in this document.
-
To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.
-
-
-
Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 11, 2003 to January 28, 2003, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
-
Receipt and Status Report for PMNs
This status report identifies the PMNs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.
-
48 Premanufacture Notices Received From: 01/11/03 to 01/28/03
Projected Notice End Case No.
Received Date
Date
Manufacturer/Importer
Use
Chemical
P-03-0261
01/13/03
04/13/03
CBI
(G) Resin coating (G) Acrylated uretahane P-03-0262
01/13/03
04/13/03
CBI
(G) Adhesive
(G) Polymeric mdi component
polyester prepolymer P-03-0263
01/13/03
04/13/03
CBI
(G) Industrial
(G) Urethane acrylate coating binder
polymer component P-03-0264
01/13/03
04/13/03
CBI
(S) Epoxy
(G) Polymer of crosslinking agent diethylenetriamine for industrial
with polyepoxy coating applications functional polymers over metal and concrete substrates. P-03-0265
01/13/03
04/13/03
CBI
(S) Epoxy
(G) Polymer of crosslinking agent diethylenetriamine for industrial
with polyepoxy coating applications functional polymers over metal and concrete substrates. P-03-0266
01/13/03
04/13/03
CBI
(G) Component of a (G) Rhodamine b ester coating with an open with polymers of use
epichlorohydrin, phenol, formaldehyde novolac P-03-0267
01/13/03
04/13/03
CBI
(G) Component of a (G) Rhodamine b ester coating with an open with polymers of use
epichlorohydrin, phenol, formaldehyde novolac P-03-0268
01/13/03
04/13/03
CBI
(G) Component of a (G) Rhodamine b ester coating with an open with polymers of use
epichlorohydrin, phenol, formaldehyde novolac P-03-0269
01/13/03
04/13/03
CBI
(G) Component of a (G) Rhodamine b ester coating with an open with polymers of use
epichlorohydrin, phenol, formaldehyde novolac
[[Page 8605]]
P-03-0270
01/13/03
04/13/03
CBI
(G) Component of a (G) Rhodamine b ester coating with an open with polymers of use
epichlorohydrin, phenol, formaldehyde novolac P-03-0271
01/13/03
04/13/03
CBI
(G) Component of a (G) Rhodamine b ester coating with an open with polymers of use
epichlorohydrin, phenol, formaldehyde novolac P-03-0272
01/14/03
04/14/03
CBI
(G) Destructive use. (G) Olefins P-03-0273
01/14/03
04/14/03
CBI
(G) Open non-
(G) Acrylic polymer dispersive use. P-03-0274
01/14/03
04/14/03
CBI
(G) Open non-
(G) Polyester dispersive use. P-03-0275
01/14/03
04/14/03
CBI
(G) Concrete additive (G) Substituted hydroxyethylcellulos e ethers P-03-0276
01/14/03
04/14/03
CBI
(S) Intermediates for (G) polyurethane for Polyalkylenecarbonat artificial/synthetic e diol leathers; intermediates for polyurethane for paint, adhesive, coating materials, etc.; tpu(thermoplastic elastomer urethane) intermediate P-03-0277
01/14/03
04/14/03
CBI
(S) Intermediates for (G) polyurethane for Polyalkylenecarbonat artificial/synthetic e diol leathers; intermediates for polyurethane for paint, adhesives, coating materials, etc.; tpu (thermoplastic elastomer urethane) intermediate P-03-0278
01/15/03
04/15/03
Southern Diversified (S) Monomer for
(S) Linseed oil, Products, LLC
polymer manufacture maleated, 2-[(1-oxo- 2-propenyl)oxy]ethyl ester P-03-0279
01/15/03
04/15/03
Southern Diversified (S) Monomer for
(S) Soybean oil, Products, llC
polymer manufacture maleated, 2-[(1-oxo- 2-propenyl)oxy]ethyl ester P-03-0280
01/13/03
04/13/03
Hi-tech Color, Inc. (S) Thermal transfer (G) Polyyurethane- sheet (back coating silicone agent) P-03-0281
01/16/03
04/16/03
Solutia Inc
(S) Degassing agent (G) Acrylic copolymer for industrial coatings P-03-0282
01/16/03
04/16/03
CBI
(G) Raw material (G) Amino-substituted carbopolycycle P-03-0283
01/16/03
04/16/03
Mitsui Chemicals (S) Reagents for (G) Adenosine,N- America, Inc.
nucleic acid testing benzoyl-5-0-[bis(4- (on farm animals, methoxyphenyl) crops, plants, foods, living entities other than humans) P-03-0284
01/17/03
04/17/03
Eastman Kodak Company (S) Chemical
(S) 1h-benz[e]indole, intermediate used in 1,1,2-trimethyl-, the manufacture of a hydrochloride dye in imaging media/ products P-03-0285
01/17/03
04/17/03
Eastman Kodak Company (S) Chemical
(S) 1h- intermediate used in benz(e)indolium, the manufacture of a 1,1,2,3-tetramethyl- dye in imaging media/ , salt with 4- products
methylbenzenesulfoni c acid (1:1) P-03-0286
01/17/03
04/17/03
CBI
(G) Intermediate in (G) Methoxycyclodiene aroma chemical produiction. P-03-0287
01/17/03
04/17/03
CBI
(G) Textile colorant (G) Substituted pyridinemethanesulfo nic acid, [[[(sulfooxy)ethyl]s ulfonyl]phenyl] [sulfophenyl], sodium salt P-03-0288
01/21/03
04/21/03
CBI
(G) Open, non-
(G) Substituted dispersive use
benzophenone P-03-0289
01/21/03
04/21/03
CBI
(G) Coating component (G) Modified polyolefin polyacrylate copolymer P-03-0290
01/22/03
04/22/03
CBI
(G) Fragrance
(G) Propanoic acid, substituted ester P-03-0291
01/22/03
04/22/03
Grain Processing (G) Feedstock for (G) Corn by product Corporation
processing P-03-0292
01/22/03
04/22/03
Grain Processing (G) Animal feed, well (G) Thermochemical Corporation
drilling fluid, ore mechanical processed processing
maize fiber P-03-0293
01/23/03
04/23/03
CBI
(G) Open, non
(G) Modified dispersive use
polyester polymer P-03-0294
01/23/03
04/23/03
Solutia Inc.
(S) Hardener for (G) Cycloaliphatic industrial flooring polyamine compounds P-03-0295
01/23/03
04/23/03
Solutia Inc
(S) Binder for
(G) Modified industrial coatings hydroxyfunctional acrylic copolymer P-03-0296
01/23/03
04/23/03
Mitsui Chemicals (S) Reagents for (S) Cytidene, n- America, Inc.
nucleic acid testing benzoyl-5 - o-[bis(4- (on farm animals, methoxyphenyl)phenyl crops, plants,
methyl]-2'-deoxy- foods, living entities other than humans) P-03-0297
01/23/03
04/23/03
CBI
(G) Coupling agent/ (G) Modified compatibilizer
polyolefin
[[Page 8606]]
P-03-0298
01/23/03
04/23/03
Mitsui Chemicals (S) Reagents for (S) Guanosine, 5'-o- America, Inc.
nucleic acid testing [bis(4- (on farm animals, methoxyphenyl)phenyl crops, plants,
methyl]-2'-deoxy-n- foods, living
(2-methyl-1- entities other than oxopropyl)- humans) P-03-0299
01/23/03
04/23/03
CBI
(G) A chemical for (G) Urethane making electronic dimethacrylate devices P-03-0300
01/23/03
04/23/03
CBI
(G) Additive for (G) Halogenated plastics
phosphate P-03-0301
01/24/03
04/24/03
CBI
(G) Binder, colloid (G) Vinyl acrylic emulsion polymer P-03-0302
01/24/03
04/24/03
CBI
(S) Polymeric
(G) Acrylic copolymer stabilizer for the production of acrylic homopolymer or copolymer dispersions which will eventually be used in textile printing applications P-03-0303
01/27/03
04/27/03
Kuraray America, Inc. (S) Polyurethane (S) 2-propenoic acid, resins
2-methyl-1,8- octanediyl ester P-03-0304
01/27/03
04/27/03
Kuraray America, Inc. (S) Polyurethane (S) 2-propenoic acid, resins
1,9-nonanediykl ester P-03-0305
01/24/03
04/24/03
Sensient Colors Inc. (S) Technical dye (G) 2- intermediate
naphthalesulfonic acid, acetylamino phenyl azo, sulfo-1- naphthalenyl azo, diamino-5-sulfopheny azo, acid P-03-0306
01/27/03
04/27/03
CBI
(G) Sanitation aid (G) Polyalkyl- triethoxysilyl-alkyl- substituted heteromonocycle P-03-0307
01/28/03
04/28/03
CBI
(G) Colourant
(G) Azo nickel complex P-03-0308
01/24/03
04/24/03
Polyone Corporation (S) Hardcoat sealant (S) Isocyanic acid, for low density
polymethylene substrates.
polyphenylene ester, polymer with methyloxirane and oxirane.
In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:
-
30 Notices of Commencement From: 01/11/03 to 01/28/03
Commencement/Import Case No.
Received Date
Date
Chemical
P-01-0356
01/22/03
12/26/02
(G) N,N' substituted aniline sulfonic acid, potassium salt P-01-0616
01/15/03
12/22/02
(G) Aliphatic polycarbonate polyester P-02-0280
01/15/03
01/06/03
(G) Dialkylphenoxyalkyl carboxylate, metal salt P-02-0451
01/14/03
12/20/02
(G) Amphoteric cellulose ether P-02-0482
01/13/03
12/27/02
(S) 2-propenoic acid, 2- methyl-, polymers with chlorinated maleic anhydride-polypropylene reaction products, cyclohexyl methacrylate and me methacrylate P-02-0502
01/21/03
01/09/03
(G) Ipdi prepolymer P-02-0596
01/27/03
01/13/03
(G) Epoxy-amine adduct salt P-02-0601
01/27/03
12/17/02
(G) Acrylic copolymer P-02-0672
01/17/03
12/19/02
(G) Modified polyvinyl butyral P-02-0673
01/17/03
12/19/02
(G) Modified polyvinyl butyral P-02-0676
01/17/03
12/19/02
(G) Modified polyvinyl butyral P-02-0813
01/13/03
12/09/02
(G) Maleic anhydride and acryls modified polyolefine P-02-0826
01/22/03
12/16/02
(S) Octadecanoic acid, compound with guanidine (1:1) P-02-0881
01/14/03
12/10/02
(G) Silated acrylic resin P-02-0893
01/23/03
01/14/03
(G) Ammonium sodium salt of substituted copper phthalocyanine derivative P-02-0912
01/23/03
12/20/02
(G) Di-substituted cyclic alkane P-02-0954
01/16/03
01/09/03
(G) Metallic diethylglycol ethylether complex P-02-0964
01/27/03
12/30/02
(G) Modified alkyd resin P-02-0966
01/24/03
12/18/02
(G) Modified polyacrylate P-02-0967
01/24/03
12/18/02
(G) Modified polyacrylate P-02-0968
01/24/03
12/18/02
(G) Modified polyacrylate P-02-0980
01/28/03
01/16/03
(G) Brominated epoxy resin P-02-0984
01/14/03
12/26/02
(S) 1,3- benzenedimethanamine, .nu.-(2-phenylethyl) derivs. P-02-0996
01/28/03
01/24/03
(G) Aliphatic triamine P-02-1014
01/13/03
01/03/03
(G) Cationic polyether P-02-1057
01/23/03
01/08/03
(G) Acrylate, acrylonitrile, butadiene rubber-extended epoxy resin P-03-0004
01/22/03
01/14/03
(S) Titanium, acetylacetone et alc. iso- pr alc. complexes P-03-0021
01/25/03
01/24/03
(S) 2-propenenitrile, polymer with diethenylbenzene, hydrolyzed, reaction products with diethylenetriamine
[[Page 8607]]
P-03-0043
01/27/03
01/17/03
(G) Substituted phenolic polymer P-98-1138
01/17/03
11/20/02
(S) Hexanoic acid, 6-[[(4- methylphenyl)sulfonyl]ami no]-, compound with 2,2',2''- nitrilotris[ethanol](1:1)
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: February 6, 2003. Sandra R. Wilkins, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.
[FR Doc. 03-4254 Filed 2-21-03; 8:45 am]
BILLING CODE 6560-50-S
