Toxic and hazardous substances control: New chemicals Receipt and status information,
[Federal Register: October 3, 2007 (Volume 72, Number 191)]
[Notices]
[Page 56347-56352]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr03oc07-49]
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2007-0984; FRL-8151-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from August 3, 2007 to September 7, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number, must be received on or before November 2, 2007.
ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2007-0984, by one of the following methods.
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID number EPA-HQ-OPPT-2007-0984. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the Docket's normal hours of operation, and special arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT- 2007-0984. EPA's policy is that all comments received will be included in the public docket without change and may be made available online at http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e- mail. The regulations.gov website is an ``anonymous access'' systems, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e- mail comment directly to EPA without going through regulations.gov your e-mail address will be automatically captured and included as part of the comment that is placed in the public docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For additional information about EPA's public docket, visit the EPA Docket Center homepage at http://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket's index available in regulations.gov. To access the electronic docket, go to http://www.regulations.gov, select ``Advanced Search,'' then
``Docket Search.'' Insert the docket ID number where indicated and select the ``Submit'' button. Follow the instructions on the regulations.gov web site to view the docket index or access available documents. Although listed in the index, some information is not publicly available, e.g., Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only
available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC PublicReading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding Federal holidays. The telephone numberof the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
[[Page 56348]]
SUPPLEMENTARY INFORMATION:
-
General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
-
Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is claimed CBI). In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
-
Tips for preparing your comments. When submitting comments, remember to:
i. Identify the document by docket number and other identifying information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information and/or data that you used.
v. If you estimate potential costs or burdens, explain how you arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.
viii. Make sure to submit your comments by the comment period deadline identified.
-
-
Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from August 3, 2007 to September 7, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
-
Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.
-
74 Premanufacture Notices Received From: 08/03/07 to 09/07/07
Projected Notice End Case No.
Received Date
Date
Manufacturer/Importer
Use
Chemical
P-07-0602
08/03/07
10/31/07
CBI
(S) Chemical
(G) 1-alkene, 10,10- intermediate
diethoxy- P-07-0603
08/03/07
10/31/07
CBI
(G) A component of (G) Reaction product adhesives
of 2-propenoic acid, 2-methyl-, monoester and a proprietary isocyanate P-07-0604
08/03/07
10/31/07
CIBA Specialty
(S) Ultra violet (G) Poly(oxy-1,2- Chemicals
curing agent in
alkyl),.alpha.-hydro- Corporation
surface modifier .omega.-hydroxy- (for plastics)
,.alpha.- oxoarylacetate P-07-0607
08/07/07
11/04/07
Hybrid Plastics, Inc. (S) Flame retardant (S) 1,2- for thermoplastic ethanediamine, N1-[3- resins
[3,5,7,9,11,13,15- heptakis 2methylpropyl),penta cyclo[9.5.1.13,9,15, 15.17,13]octasiloxan- 1-yl]propyl]- P-07-0608
08/07/07
11/04/07
CBI
(G) Component of (G) Aliphatic industrial use
polyurethane coating
acrylate P-07-0609
08/08/07
11/05/07
CBI
(G) Additive for (G) Sulfurized fatty lubricants
acid derivative P-07-0610
08/08/07
11/05/07
CBI
(G) Sealant
(G) Bisurea compound P-07-0611
08/08/07
11/05/07
CBI
(G) Sealant
(G) Bisurea compound P-07-0612
08/08/07
11/05/07
CBI
(G) Sealant
(G) Bisurea compound P-07-0613
08/08/07
11/05/07
CBI
(G) Sealant
(G) Bisurea compound P-07-0614
08/09/07
11/06/07
CBI
(G) Surface treatment (G) 2-arylazo-N-aryl- for pigments
3-oxo-alkylamide P-07-0615
08/09/07
11/06/07
CBI
(G) Component of foam (G) Fatty acid polymer with aliphatic diol and aromatic diacid P-07-0616
08/09/07
11/06/07
CBI
(G) Component of foam (G) Fatty acid polymer with aliphatic diol and aromatic diacid
[[Page 56349]]
P-07-0617
08/10/07
11/07/07
3M Company
(G) Heat transfer (G) Hydrofluoroether fluid P-07-0618
08/10/07
11/07/07
3M Company
(G) Chemical
(G) Alkyl acid intermediate
fluoride P-07-0619
08/10/07
11/07/07
CBI
(G) Lubricant
(G) Alkanoldioic additive
acid, dialkyl ester P-07-0620
08/10/07
11/07/07
CBI
(G) Lubricant
(G) Alkanoldioic additive
acid, dialkyl ester P-07-0621
08/10/07
11/07/07
CBI
(G) Lubricant
(G) Alkanoldioic additive
acid, dialkyl ester P-07-0622
08/10/07
11/07/07
CBI
(G) Lubricant
(G) Alkanoldioic additive
acid, dialkyl ester P-07-0623
08/13/07
11/10/07
CBI
(G) Filler dispersant (G) Polyalkoxylate phosphite ester P-07-0624
08/14/07
11/11/07
CBI
(S) Anti-stain in (G) Amino functional construction
silsesquioxanes P-07-0625
08/14/07
11/11/07
CBI
(G) Additive for inks (G) Cyclic amine and cleaners
polymer with epoxides, alkylcarboxy derivs. P-07-0626
08/14/07
11/11/07
CBI
(G) Toner additive (G) Methyl trialkyl ammonium chloride, reaction products with silicic acid, lithium, magnesium and sodium salt P-07-0627
08/14/07
11/11/07
CBI
(S) Acrylic polymer (G) Acrylic polymer used in the manufacture of adhesive tapes P-07-0628
08/14/07
11/11/07
CBI
(G) Non-dispersive (G) Blocked aromatic use
isocyanate P-07-0629
08/14/07
11/11/07
Croda Inc.
(G) Polymer additive (G) Polyethylene glycol dierucate P-07-0630
08/15/07
11/12/07
CBI
(G) Additive, open, (G) Polyester non-dispersive use polyether urethane block copolymer P-07-0631
08/15/07
11/12/07
CBI
(G) Additive, open, (G) Polyester non-dispersive use polyether urethane block copolymer P-07-0632
08/15/07
11/12/07
CBI
(G) Additive, open, (G) Polyester non-dispersive use polyether urethane block copolymer P-07-0633
08/15/07
11/12/07
Angus Chemical
(S) Intermediate (G) Nitroalcohol Company, a
chemical
derivative subsidiary of the Dow Chemical Company P-07-0634
08/15/07
11/12/07
Angus chemical
(S) Metal working (G) Alkanolamine Company, a
fluid additive
derivative subsidiary of the Dow Chemical Company P-07-0635
08/16/07
11/13/07
CBI
(G) Coating component (G) Styrene, polymer with methacrylate ester, alkene, and substituted trialkoxysilane P-07-0636
08/17/07
11/14/07
CBI
(G) Chemical
(G) Aluminum mixed intermediate /
metal and diol catalyst
complex P-07-0637
08/17/07
11/14/07
CBI
(G) Chemical
(G) Aluminum mixed intermediate /
metal and mixed diol catalyst
complex P-07-0638
08/16/07
11/13/07
Chemtek, Inc.
(S) Concrete cleaner (G) Alkylphosphonic component
acid mixture, lithium salt P-07-0639
08/20/07
11/17/07
CBI
(S) Gas hydration (G) Ether carboxylic inhibitor
acid amide P-07-0640
08/20/07
11/17/07
Forbo Adhesives, LLC (G) Hot melt
(G) Isocyanate polyurethane
functional polyester adhesive
polyether urethane polymer P-07-0641
08/21/07
11/18/07
Spectra Colors Corp. (G) Dye for washable (G) Ethoxylated ink systems
triphenylmethane P-07-0642
08/17/07
11/14/07
CBI
(G) Cleaning and (G) Polystyrene polishing chemical derivative for semiconductor manufacturing P-07-0643
08/22/07
11/19/07
DIC International (G) Acrylic resin for (G) Hydroxyalkyl (USA), LLC.
coatings
methacrylate, polymer with branched benzene, alkyl alkenoate and alkyl fumarate P-07-0644
08/16/07
11/13/07
Chemtek, Inc.
(S) Concrete cleaner (G) Alcohol, component
ethoxylated, phosphated, lithium salt P-07-0645
08/22/07
11/19/07
DIC International (G) Acrylic resin for (G) Hydroxyalkyl (USA), LLC.
coatings
methacrylate, polymer with branched benzene, alkyl (c=1-6) methacrylate, alkyl acrylate and alkenoic acid P-07-0646
08/23/07
11/20/07
Firmenich Inc.
(G) Chemical
(S) Dodecane, 1,1,3- intermediate
triethoxy- P-07-0647
08/23/07
11/20/07
Firmenich Inc
(G) Chemical
(S) Decane, 1,1- intermediate
diethoxy- P-07-0648
08/22/07
11/19/07
Incorez Corporation (S) Amine hardener (G) Polyamnine used in the
hardner formulation of epoxy based paints and coatings P-07-0649
08/22/07
11/19/07
CBI
(G) Coating (surface (G) Urethane resin treatment) P-07-0650
08/24/07
11/21/07
CBI
(G) Paper product (G) Glyoxalated additive
acrylamide, dadmac, 2- hydroxyethylacrylate ternary copolymer with amine-amide adduct P-07-0651
08/24/07
11/21/07
CBI
(G) Crosslinker for (G) Amine-amide polyacrylamides; adduct additive for resins P-07-0652
08/24/07
11/21/07
Bio-based
(G) Plastics
(S) Soybean oil, Technologies, LLC
reaction products with diethanolamine and ethaneperoxoic acid
[[Page 56350]]
P-07-0653
08/24/07
11/21/07
CBI
(S) Flame retardant (G) Ethoxylated for plastics (eg. methylphosphonic polyurethane)
acid P-07-0654
08/07/07
11/04/07
Cara Plastics Inc (S) Composite resins (G) Maleinated crosslinker
Acrylated epoxided Soy oil P-07-0655
08/22/07
11/19/07
CBI
(S) Binder for in- (G) Waterborne mold coatings
polyurethane P-07-0656
08/28/07
11/25/07
CBI
(G) Dyestuff
(G) Substituted triazine derivative P-07-0657
08/28/07
11/25/07
CBI
(G) Dyestuff
(G) Substituted benzimidazol sulfonic acid P-07-0658
08/29/07
11/26/07
R. T. Vanderbilt (S) Anti-wear and (S) Amine bis(C11 14 Company, Inc.
anti-oxidant agent branched and linear for lubricants
alkyl), tungstates P-07-0659
08/29/07
11/26/07
CBI
(G) Dyestuff
(G) Substituted triazine derivative P-07-0660
08/29/07
11/26/07
CBI
(G) Dyestuff
(G) Substituted anthraquinone derivative P-07-0661
08/29/07
11/26/07
CBI
(G) Dyestuff
(G) Substituted phthalocyanine P-07-0662
08/29/07
11/26/07
Cytec Industries Inc. (S) Flow-leveling (G) Substituted additive for
alkenyl-terminated industrial coatings siloxanes and silicones polymers with substituted acrylates, peroxide initiated P-07-0664
09/04/07
12/02/07
CBI
(G) Textile additive (G) Poly(ethylene and foam additive oxide) P-07-0665
09/04/07
12/02/07
CBI
(G) Textile additive (G) Poly(ethylene and foam additive oxide) P-07-0666
09/04/07
12/02/07
CBI
(G) Textile additive (G) Poly(ethylene and foam additive oxide) P-07-0667
09/04/07
12/02/07
CBI
(G) Textile additive (G) Poly(ethylene and foam additive oxide) P-07-0668
09/04/07
12/02/07
CBI
(G) Textile additive (G) Poly(ethylene and foam additive oxide) P-07-0669
09/04/07
12/02/07
CBI
(G) Textile additive (G) Poly(ethylene and foam additive oxide) P-07-0670
09/04/07
12/02/07
CBI
(S) Chemical
(G) Butanoic acid, intermediate
(1R)-1-ethenylalkyl ester P-07-0671
09/04/07
12/02/07
CBI
(G) Lamination
(G) Polyurethane adhesive
adhesive P-07-0672
09/05/07
12/03/07
CBI
(G) Metal working (G) Polyethylene fluid
glycol ether acid P-07-0673
09/05/07
12/03/07
Mane, USA
(G) Perfumery
(S) 2(3H)-furanone,5- ingredient
(6-heptenyl)dihydro- P-07-0674
09/07/07
12/05/07
CBI
(G) Protective
(G) Oxirane, coating
substituted siliylmethyl-, hydrolysis products with alkanol zirconium(4+) salt and silica, acetates P-07-0675
09/06/07
12/04/07
CBI
(G) Destructive use (G) Phenolic amine (antioxidant) P-07-0676
09/06/07
12/04/07
CBI
(G) Destructive use (G) Phenolic amine (antioxidant) P-07-0677
09/07/07
12/05/07
Itw Devcon Futura (S) Chemical
(G) Aspartic acid, N- Coatings
intermediate
alkyl,N- (isocyanatoalkyl)- ,alkyl ester P-07-0678
09/06/07
12/04/07
CIBA Specialty
(G) Paper additive (G) substituted Chemicals
Benzenemethanaminium Corporation
chloride/acrylamide/ acrylic acid/ substituted ethanaminium chloride polymer
In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:
-
4 Test Marketing Exemption Notices Received From: 8/03/07 to 09/07/07
Projected Notice End Case No.
Received Date
Date
Manufacturer/Importer
Use
Chemical
T-07-0020
08/07/07
09/20/07
CBI
(G) Component of (G) Aliphatic industrial use
polyurethane coating
acrylate T-07-0021
08/17/07
09/30/07
Forbo Adhesives, LLC (G) Hot melt
(G) Isocyanate polyurethane
functional polyester adhesive
polyether urethane polymer T-07-0022
08/10/07
09/23/07
Shell lubricants (S) Synthesis high (S) Mixture of melt paraffinwax hydrocarbons (C20- designed for
C110) containing numerous industrial straight and application
branched chain alkanes produced by synthesis from natural gas (fisher- tropsch) T-07-0023
08/30/07
10/13/07
Cytec Industries Inc. (S) Flow-leveling (G) Substituted additive for
alkenyl-terminated industrial coatings siloxanes and silicones polymers with substituted acrylates, peroxide initiated
[[Page 56351]]
In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:
-
49 Notices of Commencement From: 8/03/07 to 09/07/07
Commencement Notice Case No.
Received Date
End Date
Chemical
P-05-0321
09/06/07
08/15/07
(G) Mono-methyl maleate/ acrylic acid/ hydroxypropyl methacrylate copolymer P-06-0069
08/29/07
08/17/07
(G) Dialkyl carbocyclo-, reaction products with alkadiene, by-products from, distant residues P-06-0166
08/06/07
07/22/07
(S) 3h-1,2,4-triazol-3- one, 1,2-dihydro- P-06-0229
08/27/07
08/06/07
(G) Unsaturated aliphatic urethane acrylate P-06-0334
08/09/07
07/17/07
(G) Modified polyurethane P-06-0343
08/29/07
08/17/07
(G) Dialkyl carbocyclo-, reaction products with alkadiene, cyclized, dehydrogenated, isomerized, by-products from, distant residues P-06-0438
08/07/07
07/21/07
(G) Fatty acids, C18- unsaturated, dimers, hydrogenated, polymers with polypropylene glycol diamine, amino acid and polyoxyalkylenepolyamine P-06-0576
08/06/07
07/12/07
(G) Fluoroalkylacrylate copolymer P-06-0608
08/29/07
08/06/07
(G) Alkyl acrylate, polymer with alkyl acrylates, styrene and hydroxyalkyl acrylates, peroxide-initiated P-06-0677
09/05/07
08/01/07
(G) Ethylene interpolymer P-06-0690
08/15/07
07/26/07
(G) Diphenylmethane isocyanate polyester elastomer P-06-0692
08/13/07
07/16/07
(G) Derivatized hydroxylated triglycerides P-06-0752
08/03/07
07/27/07
(G) Modified imidazole P-06-0815
09/04/07
08/24/07
(S) 1,2-ethanediamine, N- [3- (trimethoxysilyl)propyl]- , hydrolysis products with wollastonite (CA(SI03)) P-06-0816
08/16/07
07/18/07
(G) Modified reaction products of alkyl alcohol, halogenated alkane, substituted epoxide, and amino compound P-06-0829
08/06/07
08/02/07
(S) Fatty acids, canola- oil, me esters P-07-0009
08/27/07
08/07/07
(G) Aqueous polyurethane dispersion P-07-0058
08/22/07
08/13/07
(S) 3-hexene, 1-(2- butenyloxy)-, (3Z)- P-07-0087
09/04/07
08/28/07
(G) Partially fluorinated condensation polymer P-07-0097
08/09/07
06/08/07
(S) 2-propenoic acid, 2- methyl-, butyl ester, polymer with ethenylbenzene and 2- sulfoethyl 2-methyl-2- propenoate, ammonium salt P-07-0220
08/13/07
07/05/07
(G) Aliphatic polyester- polyether polyurethane resin P-07-0228
08/31/07
08/20/07
(G) Polyether modified polydimethylsiloxane P-07-0253
09/07/07
08/14/07
(G) Polyether-modified siloxane P-07-0258
08/22/07
08/03/07
(G) Acrylic acid polymer with vinylphosphonic acid and ethylene glycol acrylate P-07-0261
08/08/07
07/05/07
(G) Urethane acrylate resin P-07-0268
08/09/07
06/08/07
(G) Substituted benzoxazolium salt P-07-0283
08/22/07
08/14/07
(S) Thiophene, 2,5-dibromo- 3-hexyl- P-07-0286
08/23/07
07/30/07
(G) Phenol, 4,4'-(1- methylethylidene)bis[disu bstituted-, polymer with disubstituted phenol P-07-0287
08/17/07
08/01/07
(G) Phenol, 4,4'-(1- methylethylidene)bis[disu bstituted-, polymer with disubstituted phenol, substituted propenoate P-07-0301
08/16/07
07/30/07
(G) Thioketone P-07-0329
09/07/07
08/16/07
(G) Derivative of 2,4- dihydroxy benzophenone P-07-0332
08/29/07
08/10/07
(G) Alkyloxy carboxylic acid P-07-0335
08/03/07
07/27/07
(G) Epoxy resin P-07-0337
08/16/07
08/01/07
(G) Polyester polyurethane P-07-0349
08/30/07
08/23/07
(G) Fluorinated alkylammonium salt P-07-0367
08/08/07
07/20/07
(G) Fluorinated zinc dialkyldithiophosphate P-07-0369
08/21/07
07/30/07
(S) Definition: Extractives and thier physically modified derivatives. Populus Nigra P-07-0369
08/21/07
07/30/07
(S) Oils, poplar, Populus Nigra P-07-0370
08/06/07
07/23/07
(G) Glycol phosphite P-07-0379
08/08/07
08/01/07
(S) Ethanol, 2,2',2''- nitrilotris-, polymer with .alpha.-hydro- .omega.-hydroxypoly(oxy- 1,4-butanediyl) and 1,1'- methylenebis[4- isocyanatocyclohexane], 2- hydroxyethyl acrylate- blocked P-07-0393
08/06/07
07/28/07
(G) Isocyanate functional polyester urethane polymer P-07-0401
08/17/07
08/01/07
(S) 2-propenoic acid, 2- methyl, 2-hydroxyethyl ester, homopolymer P-07-0412
08/23/07
08/04/07
(G) 2-propenoic acid, 2- methyl-, polymer with 2- ethylhexyl 2-propenoate, methyl 2-methyl-2- propanoate, substituted-1- propanesulfonic acid and 2-methyl-2-propenamide P-07-0416
08/07/07
08/06/07
(G) Aziridine homopolymer derivative P-07-0429
08/08/07
08/06/07
(G) Substituted propenoic acid polymer with substituted bisethanol and substituted cyclohexane P-07-0437
09/04/07
08/26/07
(G) Siloxanes and silicones, di-alkyl, chlorine-terminated, polymers with 2- ethylhexyl acrylate- polyoxyalkylene glycol reaction products, polyoxyalkylene glycol mono-alkyl ether- terminated P-07-0441
09/04/07
08/27/07
(G) Glycerides, alkyl P-07-0443
09/05/07
08/30/07
(G) Methacrylate copolymer with phosphinicobis methacrylate and 2- (phosphonooxy) ethyl 2- methyl-2-propenoate, sodium salt, peroxydisulfuric acid ([ho)s(o)2]2o2) diammonium salt-initiated
[[Page 56352]]
P-07-0469
09/06/07
08/30/07
(G) Magnesium hydroxide surface treated
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: September 24, 2007. Chandler M. Sirmons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.
[FR Doc. E7-19543 Filed 10-2-07; 8:45 am]
BILLING CODE 6560-50-S
